INTEGRAÇÃO DO MONITORAMENTO COM VANT À GESTÃO DA SEGURANÇA DAS OBRAS: UMA REVISÃO SISTEMÁTICA DA LITERATURA
DOI:
https://doi.org/10.46421/entac.v18i.1162Palavras-chave:
Veículo Aéreo Não Tripulado (VANT), Segurança, ObrasResumo
Embora diversos estudos tenham explorado o potencial do VANT para apoiar atividades de segurança em canteiros de obras, esta aplicação ainda tem sido limitada, em parte pela falta de integração do monitoramento com VANT e seus produtos à gestão da segurança das obras. Diante desta problemática, este artigo busca identificar como o VANT pode ser integrado ao processo de gestão da segurança de obras utilizando como estratégia de pesquisa a revisão sistemática da literatura. O VANT tem sido aplicado, principalmente, para monitorar as condições de segurança do canteiro, mas as informações coletadas nesta etapa podem apoiar todo o ciclo de melhoria contínua da segurança.
Referências
ALIZADEHSALEHI, S.; YITMEN, I.; CELIK, T.; ARDITI, D. The effectiveness of an integrated BIM/UAV model in managing safety on construction sites. International Journal of Occupational Safety and Ergonomics, p. 1-16, 2018.
ASHOUR, R.; TAHA, T.; MOHAMED, F.; HABLEEL, E.; KHEIL, Y.; ELSALAMOUNY, M.; KADADHA, M.; RANGAN, K.; DIAS, J.; SENEVIRATNE, L.; CAI, G. Site inspection drone: A solution for inspecting and regulating construction sites. In: International Midwest Symposium on Circuits and Systems, 59, 2016, Abu Dhabi. Proceedings... Abu Dhabi : MWSCAS, 2016.
BENITE, A. J. Sistema de Gestão da Segurança e Saúde do Trabalho para Empresas Construtoras. 236 f. Dissertação (Mestrado em Engenharia) – Programa de Pós-Graduação em Engenharia, Escola Politécnica da Universidade de São Paulo, São Paulo, 2004.
CALANTROPIO, A. The use of UAVs for performing safety-related tasks at post-disaster and non-critical construction sites. Safety, vol. 5, 64, 2019.
CAMPOS, V. F. TQC - Controle da Qualidade Total (no estilo japonês). Belo Horizonte: Fundação Christiano Ottoni. Escola de Engenharia, 1992.
COSTA D.B.; MELO, R. R. S.; ALVARES J. S.; BELLO A. A. Evaluating the Performance of Unmanned Aerial Vehicles for Safety Monitoring. In: Annual Conference of the International Group for Lean Construction, 24, p. 23-32, 2016, Boston. Proceedings... Boston: IGLC, 2016.
GHEISARI, M.; ESMAEILI, B. Applications and requirements of unmanned aerial systems (UASs) for construction safety. Safety Science, v. 118, p. 230-240, 2019.
GHEISARI, M.; ESMAEILI, B. Unmanned Aerial Systems (UAS) for construction safety applications. In: Construction Research Congress, San Juan, p. 2642-2650, 2016. Proceedings...
GHEISARI, M.; IRIZARRY, J.; WALKER, B. UAS4SAFETY: The potential of unmanned aerial systems for construction safety applications. In: Construction Research Congress, p.1801-1810, 2014. Proceedings...
GHEISARI, M.; RASHIDI, A.; ESMAEILI, B. Using Unmanned Aerial Systems for Automated Fall Hazard Monitoring. In: Construction Research Congress, p. 62-72, 2018, New Orleans. Proceedings...
GUO, Y.; NIU, H.; LI, S. Safety monitoring in construction site based on unmanned aerial vehicle platform with computer vision using transfer learning techniques. In: Asia-Pacific Workshop on Structural Health Monitoring, 7, 2018, Hong Kong. Proceedings... Hong Kong: APWSHM, 2018.
GUO, Y.; XU, Y.; LI, S. Dense construction vehicle detection based on orientation-aware feature fusion convolutional neural network. Automation in Construction, vol. 112, 103124, 2020.
IRIZARRY, J.; COSTA, D. B. Exploratory study of potential applications of unmanned aerial systems for construction management tasks. Journal of Management in Engineering, v. 32, n. 3, p. 05016001, 2016.
IRIZARRY, J.; GHEISARI, M.; WALKER, B. N. Usability assessment of drone technology as safety inspection tools. Electronic Journal of Information Technology in Construction. p. 194–212. 2012.
ISO. ISO 45001 - Occupational health and safety management systems - Requirements for guidance use. 1. ed. Geneva: ISO, 2018.
JIANG, W.; ZHOU, Y.; DING, L.; ZHOU, C.; NING, X. UAV-based 3D reconstruction for hoist site mapping and layout planning in petrochemical construction. Automation in Construction, vol. 113, 103137, 2020.
KAMING, P.; YONATHAN, G. Comparison of the supervisory cost of using an unmanned aerial system and conventional methods in construction projects. In: International Conference on Euro Asia Civil Engineering Forum, 7, 2019. Proceedings...
KIM, S.; IRIZARRY, J., COSTA, D. Potential Factors Influencing the Performance of Unmanned Aerial System (UAS) Integrated Safety Control for Construction Worksites. In: Construction Research Congress, p.2614-2623, 2016. Proceedings...
KIM, S.; IRIZARRY, J; COSTA, D. Field Test-Based UAS Operational Procedures and Considerations for Construction Safety Management: a qualitative exploratory study. : A Qualitative Exploratory Study. International Journal Of Civil Engineering, 123, 2020.
MACHADO, F.; RUSCHEL, R. Soluções integrando BIM e internet das coisas no ciclo de vida da edificação: uma revisão crítica. Parc Pesquisa em Arquitetura e Construção, v. 9, n. 3, p. 240-258, 2018.
MARTINEZ, J.; GHEISARI, M.; ALARCÓN, L. UAV Integration in Current Construction Safety Planning and Monitoring Processes: Case Study of a High-Rise Building Construction Project in Chile. Journal of Management in Engineering, vol. 36 (3), 05020005, 2020.
MELO, R.; COSTA, D. ;ÁLVARES,J.; IRIZARRY, J. Applicability of unmanned aerial system (UAS) for safety inspection on construction sites. Safety Science,v. 98, p. 174-185, 2017.
MELO, R.; COSTA, D. Integrating resilience engineering and UAS technology into construction safety planning and control. Engineering Construction & Architectural Management, vol. 26, 2019.
PARK, J.; KIM, K.; CHO, Y. K. Framework of automated construction-safety monitoring using cloud-enabled BIM and BLE mobile tracking sensors. Journal of Construction Engineering and Management, v. 143, n. 2, 05016019, 2016.
ROBERTS, D.; BRET, T.; GOLPARVAR-FARD, M. Detecting and Classifying Cranes Using CameraEquipped UAVs for Monitoring Crane-Related Safety Hazards. In: International Workshop on Computing in Civil Engineering, p.442-449, 2017, Seattle. Proceedings... Seattle: IWCCE, 2017.
