ESTUDO DOS PERFIS DE SOLICITAÇÃO E VELOCIDADES DE ENSAIO NA AVALIAÇÃO REOLÓGICA POR REOMETRIA ROTACIONAL
DOI:
https://doi.org/10.46421/entac.v17i1.1295Palavras-chave:
Rheology, Rotational rheometry, Test method, Cement-lime mortarResumo
The rheological study of pastes and mortars by rotational rheometry does not have a brazilian normative prescription that defines the test parameters. It hampers the definition of a standardized method, in order to leave the evaluation variables such as torque and frequency at the researcher’s charge, often becoming an obstacle to comparison of results. In this work, rheological behavior of cement-lime based mortars with and without air entraining admixture was evaluated by means of rotational rheometry using level profile, ladder and ascending-descending. The results of the studied profiles have shown differences in rheological parameters of yield stress. The ladder profile was the most suitable for mortars containing air-entraining admixture because, due to the shorter test time, there was less air incorporation during rheometry, thereby reducing the influence of the test method on the evaluated properties. The ladder profile was also the most suitable for mortars without admixtures, since the test time did not allow the sedimentation of the particles as well as their influence on the rheological behavior of mortar.
Referências
ALVES, N. J. D. Avaliação dos aditivos incorporadores de ar em argamassas de revestimento. Dissertação (Mestrado), Universidade de Brasília, Brasília, 2002.
BANFILL, P. F. G. The Rheology of Fresh Mortar – A Review. In: SIMPÓSIO BRASILEIRO DE TECNOLOGIA DAS ARGAMASSAS, 6., 2005, Florianópolis. Anais... Florianópolis: ANTAC, 2005. p. 73 - 82.
CARDOSO, F. A. Método de formulação de argamassas de revestimento baseado em distribuição granulométrica e comportamento reológico. Tese (Doutorado), Escola Politécnica da Universidade de São Paulo, Departamento de Engenharia de Construção Civil, 2009.
FEYS, D.; WALLEVIK, J. E.; YAHIA, A.; KHAYAT, K. H.; WALLEVIK, O. H.; Extension of the Reiner–Riwlin equation to determine modified Bingham parameters measured in coaxial cylinders rheometers. Materials and Structures, v. 46, p. 289-311, 2013.
HIGHGATE, D. J.; WHORLOW, R. W.; End effects and particle migration effects in concentric cylinder rheometry. Rheologica Acta, v. 2, p.142-151, 1969.
MACIEL, G. F.; BARBOSA, M. P.; PEREIRA, J. B.; Análise comparativa da tensão limite de escoamento de argamassas por meio da técnica de Pashias e reometria rotacional. Revista Matéria, v. 21, n. 4, p. 866-879, 2016.
PAIVA, H. M. C. Caracterização reológica de argamassas. Dissertação (Mestrado), Universidade de Aveiro, Departamento de Engenharia Cerâmica e do Vidro, Portugal, 2005.
ROMANO, R. C. O. Incorporação de ar em materiais cimentícios aplicados em construção civil. Tese (Doutorado em Engenharia), Escola Politécnica, Universidade de São Paulo, São Paulo. 2013.
ROMANO, R. C. O.; TORRES, D. R.; PILEGGI, R. G.; Impact of aggregate grading and air-entrainment on the properties of fresh and hardened mortars. Construction and Building Materials, v. 82, p. 219-226, 2015.
SILVA, F. G. S.; ANDRADE, H. M. C.; GONÇALVES, J. P.; Estudo do comportamento reológico de pastas de cimento contendo resíduo catalítico de petróleo por Squeezeflow e reometria rotacional. Ambiente Construído, Porto Alegre, v. 18, n. 2, 2018.
STOLZ, C. M.; MASUERO, A. B.; Influence of grains distribution on the rheological behavior of mortars. Construction and Building Materials, v. 17, p. 261-271, 2018.
YÜCE, C.; WILLENBACHER, N.; Challenges in rheological characterization of highly concentrated suspensions – A case study for screen-printing silver pastes. Journal of Visualized Experiments, v. 17, n. 122, 2017.
