Estudo da hidratação na idade inicial de cimentos contendo ye’elimita (YCC) produzidos com catalisador gasto (SFCC)

Autores

DOI:

https://doi.org/10.46421/entac.v19i1.2188

Palavras-chave:

Resíduo, Cimento cálcio sulfoaluminato, Catalizador de equilíbrio gasto, Clínquer, Hidratação de cimento

Resumo

Este trabalho tem como objetivo avaliar a hidratação na idade inicial de cimentos YCC produzidos a partir do coprocessamento do SFCC. Para isso, foram produzidos seis clínqueres com diferentes teores de ye’elimita, com e sem SFCC. Estes foram caracterizados por DRX/Rietveld. As pastas foram avaliadas por TG/DTG e DRX/Rietveld para compreender o mecanismo de hidratação no terceiro dia destes cimentos. Foi possível sintetizar as principais fases dos YCC, nos clínqueres com e sem SFCC. Além disso, na idade avaliada, as pastas com e sem SFCC apresentaram composição de fases comparáveis indicando o potencial de coprocessamento deste resíduo.

Biografia do Autor

Samile Raiza Carvalho Matos, Universidade Federal da Bahia

Mestre em Engenharia Civil e aluna de doutorado na área de Construção Civil e Materiais. Doutoranda em Engenharia Civil na Universidade Federal da Bahia (Salvador - BA, Brasil).

Ana Paula Kirchheim, Universidade Federal do Rio Grande do Sul

Doutora pelo PPGEC da Universidade Federal do Rio Grande do Sul. Professora Associada II na Universidade Federal do Rio Grande do Sul (Porto Alegre - RS, Brasil).

Jardel Pereira Gonçalves, Universidade Federal da Bahia

Doutorado em Engenharia Civil pela Universidade Federal do Rio de Janeiro. Professor Associado da Escola Politécnica - Departamento de Construção e Estruturas da Universidade Federal da Bahia (Salvador - BA, Brasil).

Referências

ABU, M. J.; MOHAMED, J. J.; AHMAD, Z. A. Synthesis of high purity titanium silicon carbide from elemental powders using arc melting method. International Journal of Refractory Metals and Hard Materials, v. 47, p. 86–92, 1 nov. 2014.

ÁLVAREZ-PINAZO, G. et al. Rietveld quantitative phase analysis of Yeelimite-containing cements. Cement and Concrete Research, v. 42, n. 7, p. 960–971, 1 jul. 2012.

ÁLVAREZ-PINAZO, G. et al. In-situ early-age hydration study of sulfobelite cements by synchrotron powder diffraction. Cement and Concrete Research, v. 56, p. 12–19, 1 fev. 2014.

BEN HAHA, M.; WINNEFELD, F.; PISCH, A. Advances in understanding ye’elimite-rich cements. Cement and Concrete Research, v. 123, p. 105778, 1 set. 2019.

BHATTY, J. I. et al. Innovation in Portland Cement Manufacturing. Illinois: Portland Cement Association Skokie, 2011.

CEMBR. 2020 - 2021 Performance, and suply and demand to 2025. Global Cement Magazine, p. 8–15, mar. 2022.

CHEN, I. A.; JUENGER, M. C. G. Synthesis and hydration of calcium sulfoaluminate-belite cements with varied phase compositions. Journal of Materials Science, v. 46, n. 8, p. 2568–2577, 9 abr. 2011.

CHEN, I. A.; JUENGER, M. C. G. Incorporation of coal combustion residuals into calcium sulfoaluminate-belite cement clinkers. Cement and Concrete Composites, v. 34, n. 8, p. 893–902, 1 set. 2012.

CUESTA, A. et al. Hydration mechanisms of two polymorphs of synthetic ye’elimite. Cement and Concrete Research, v. 63, p. 127–136, 1 set. 2014.

DA COSTA, E. B. et al. Production and hydration of calcium sulfoaluminate-belite cements derived from aluminium anodising sludge. Construction and Building Materials, v. 122, p. 373–383, 30 set. 2016.

DA, Y. et al. Utilizing titanium-containing pickling sludge to prepare raw meal for clinker production. Construction and Building Materials, v. 268, p. 121216, 25 jan. 2021.

DE OLIVEIRA, J. S. et al. Influence of milling of a reused FCC catalytic waste on the early hydration stages of a special class cement. Journal of Thermal Analysis and Calorimetry, v. 147, n. 4, p. 2923–2934, 2022.

EMERITUS, T. Cement chemistry. Cement and Concrete Composites, v. 20, n. 4, p. 335, 1998.

GARCÍA-MATÉ, M. et al. Rheological and hydration characterization of calcium sulfoaluminate cement pastes. Cement and Concrete Composites, v. 34, n. 5, p. 684–691, 2012.

GARCÍA-MATÉ, M. et al. Hydration studies of calcium sulfoaluminate cements blended with fly ash. Cement and Concrete Research, v. 54, p. 12–20, 2013.

GARTNER, E.; SUI, T. Alternative cement clinkers. Cement and Concrete Research, v. 114, p. 27–39, 1 dez. 2018.

HANEIN, T.; GALVEZ-MARTOS, J. L.; BANNERMAN, M. N. Carbon footprint of calcium sulfoaluminate clinker production. Journal of Cleaner Production, v. 172, p. 2278–2287, 20 jan. 2018.

HARADA, T.; TANAKA, H.; YAMASHITA, M. Influences of lanthanum oxide in clinker on the properties of cement. Cement Science and Concrete Technology, v. 67, n. 1, p. 144–150, 2013.

KOGA, G. Y.; ALBERT, B.; NOGUEIRA, R. P. On the hydration of Belite-Ye’elimite-Ferrite (BYF) cement pastes: Effect of the water-to-cement ratio and presence of fly ash. Cement and Concrete Research, v. 137, p. 106215, 1 nov. 2020.

LUZ, C. A. et al. Valorization of galvanic sludge in sulfoaluminate cement. Construction and Building Materials, v. 23, n. 2, p. 595–601, 2009.

MAIDEL, M.; JERÔNIMO DE SANTANA PONTE, M. J.; DE ARAÚJO PONTE, H. Recycling lanthanum from effluents of elektrokinetic treatment of FCC spent catalyst, using a selective precipitation technique. Separation and Purification Technology, v. 210, p. 251–257, 2019.

MAJLING, J. et al. Relationship between raw mixture and mineralogical composition of sulphoaluminate belite clinkers in the system CaOSiO2Al2O3Fe2O3 SO3. Cement and Concrete Research, v. 23, n. 6, p. 1351–1356, 1 nov. 1993.

NABILA BOUHA, F.; KACIMI, L.; DE LA TORRE, A. G. Manufacture of rich-sulfoaluminate belite cement at low temperature from waste mixture by dry and hydrothermal processes. Construction and Building Materials, v. 314, p. 125641, 3 jan. 2022.

RUNGCHET, A. et al. Synthesis of low-temperature calcium sulfoaluminate-belite cements from industrial wastes and their hydration: Comparative studies between lignite fly ash and bottom ash. Cement and Concrete Composites, v. 83, p. 10–19, 1 out. 2017.

SCRIVENER, K. L.; JOHN, V. M.; GARTNER, E. M. Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry. Cement and Concrete Research, v. 114, p. 2–26, 1 dez. 2018.

SCRIVENER, K.; SNELLINGS, R.; BARBARA, L. A Practical Guide to Microstructural Analysis of Cementitious Materials. A Practical Guide to Microstructural Analysis of Cementitious Materials, 2018.

SHANG, D. et al. Incorporation mechanism of titanium in Portland cement clinker and its effects on hydration properties. Construction and Building Materials, v. 146, p. 344–349, 15 ago. 2017.

SINYOUNG, S.; KAJITVICHYANUKUL, P. Influence of Vanadium on Cement Properties and Leaching Analysis. Advanced Materials Research, v. 1103, p. 113–119, 2015.

WINNEFELD, F.; LOTHENBACH, B. Hydration of calcium sulfoaluminate cements - Experimental findings and thermodynamic modelling. Cement and Concrete Research, v. 40, n. 8, p. 1239–1247, 1 ago. 2010.

ZEA-GARCIA, J. D. et al. Processing and characterisation of standard and doped alite-belite-ye’elimite ecocement pastes and mortars. Cement and Concrete Research, v. 127, n. November 2019, p. 105911, 2020.

Downloads

Publicado

07/11/2022

Como Citar

MATOS, S. R. C. .; KIRCHHEIM, A. P. .; GONÇALVES, J. P. Estudo da hidratação na idade inicial de cimentos contendo ye’elimita (YCC) produzidos com catalisador gasto (SFCC). In: ENCONTRO NACIONAL DE TECNOLOGIA DO AMBIENTE CONSTRUÍDO, 19., 2022. Anais [...]. Porto Alegre: ANTAC, 2022. DOI: 10.46421/entac.v19i1.2188. Disponível em: https://eventos.antac.org.br/index.php/entac/article/view/1-13. Acesso em: 15 maio. 2024.