ANÁLISE DE 12 HABITAÇÕES DE INTERESSE SOCIAL QUANTO A FORMAÇÃO DE FUNGOS FILAMENTOSOS

Authors

DOI:

https://doi.org/10.46421/sbqp.v8i.4625

Keywords:

moisture, Filamentous fungi, Air Quality, Social housing

Abstract

The growth of filamentous fungi is highly detrimental to indoor air quality and the health and comfort of building occupants. Thus, the importance of simulating the envelope of buildings is perceived, considering the presence of humidity, as an alternative to fill the gap of the lack of technical standardization in Brazil. This study aims to analyze the impairment of indoor air quality, specifically in social housing (HIS), due to the formation of filamentous fungi. The method is divided into five main stages, such as defining the object of study, simulation in EnergyPlus, simulation in WUFI PRO, evaluation criteria and analysis of the results obtained, for ceramic brick walls and cast-in-place concrete walls. During the simulation, it was observed that the ceramic brick systems presented high relative humidity, close to 100%, with a concentration of dark spots indicating a high probability of formation of filamentous fungi. On the other hand, concrete building systems showed a reduction in relative humidity, between 70% and 80%, indicating a low risk of growth of filamentous fungi. In this way, it is observed that the HIS with ceramic brick has a greater impairment of air quality, compared to the HIS with concrete walls.

Author Biographies

Maritza da Rocha Macarthy, Universidade Federal de Pelotas

 

   

Carolina Mesquita Duarte, Universidade Federal de Pelotas

 

   

Marcelo Rosa, Universidade Federal de Pelotas

 

   

Talita Marini Brandelli, Universidade Federal de Pelotas

 

   

Thaisa Carvalho Rodrigues, Universidade Federal de Pelotas

 

 

Julia da Cruz Lopes, Universidade Federal de Pelotas

 

 

Gabriela Wrege Parra, Universidade Federal de Pelotas

 

 

References

ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS (ABNT). NBR 15575-1: Edificações habitacionais - Desempenho - Parte 1: Requisitos gerais. Rio de Janeiro: ABNT, 2020.

ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS (ABNT). NBR 15220-2: Desempenho térmico de edificações - Parte 2: Métodos de cálculo da transmitância térmica, da capacidade térmica, do atraso térmico e do fator de calor solar de elementos e componentes de edificações. Rio de Janeiro: ABNT, 2005.

ASHRAE 160. ASHRAE Standard 160: Criteria for Moisture - Control Design Analysis in Buildings. Atlanta, USA, 2016.

CUNHA, E. G.; FRITSCH, R. C. Verificação da Formação de Mofo e Bolor em Superfícies Interiores de Paredes Exteriores Situadas na Zona Bioclimática 3 de Acordo com a NBR 15220 e NBR 15575. X Encontro Nacional e VI Encontro Latino Americano de Conforto no Ambiente Construído. Natal, 2009.

DEUTSCHES INSTITUT FÜR NORMUNG. EN 15026: Hygrothermal performance of building components and building elements: assessment of moisture transfer by numerical simulation. Berlin, 2007.

DEUTSCHES INSTITUT FÜR NORMUNG. DIN 4108-2: Wärmeschutz und Energie - Einsparung in Gebäuden – Teil 2: Mindestanforderungen na den Wärmeschutz. Berlin, 2003.

FRAUNHOFER INSTITUTE FOR BUILDING PHYSICS. WUFI® Pro 6.7 manual. Holzkirchen, 2022.

LEITZKE, R. K.; BELTRAME, C. M.; FREITAS, J. R. de; SEIXAS, J. N.; MACIEL, T. S.; CUNHA, E. G. da; RHEINGANTZ, P. A. Optimization of the Traditional Method for Creating a Weather Simulation File: The Pelotas.epw Case. Journal of Civil Engineering and Architecture, v. 12, p. 741-756, 2018.

EMPRESA BRASILEIRA DE PESQUISA AGROPECUÁRIA, EMBRAPA. Normas climatológicas: estacional. Disponível em: <http://www.cpact.embrapa.br/agromet/estacao/estacional.html>.

SEDLBAUER, K. Prediction of mould fungus formation on the surface of an inside building components. Fraunhofer Institute for Building Physics, 2001.

MACARTHY, M. da R. Análise dos impactos da transferência de umidade no comportamento higrotérmico das superfícies internas de paredes externas de edificação histórica do séc. XIX. Dissertação (Mestrado). Universidade Federal de Pelotas, Pelotas, 2022.

PIRES, J.R. Estimativa da Condensação em Edificações Unifamiliares em Território Brasileiro: Simulação Higrotérmica Computacional. Tese (Doutorado). Universidade do Vale do Rio dos Sinos, São Leopoldo, 2020.

ZANONI, V. A. G.; DANTAS, A. L. de F.; NUNES, L. S.; RIOS, R. B. Estudo higrotérmico na autoconstrução: simulação computacional e medições em campo. Ambiente Construído, Porto Alegre, v. 20, n. 3, p. 109-120, jul./set. 2020. ISSN 1678-8621.

PATINO; SIEGEL. Indoor environmental quality in social housing: A literature review, Building and Environment. 2018. Disponível em: 10.1016/j.buildenv.2018.01.013.

SANTOS, A. C., OLIVEIRA, L. A., BECERE, O. H., SOUZA, J. C. S. Análise do desempenho higrotérmico de paredes de fachada por meio de simulação computacional de estudos de caso. In: ENCONTRO NACIONAL DE TECNOLOGIA DO AMBIENTE CONSTRUÍDO, 17, 2018, Foz do Iguaçu. Anais... Porto Alegre: ANTAC, 2018.

MISSIA, D. et al. Indoor Air Quality Model evaluation in a modern office. Indoor Air 2016, Bruxelas, jul. 2016.

Published

2023-10-28

How to Cite

da Rocha Macarthy, M., Mesquita Duarte, C., Rosa, M., Marini Brandelli, T., Carvalho Rodrigues, T., da Cruz Lopes, J., & Wrege Parra, G. (2023). ANÁLISE DE 12 HABITAÇÕES DE INTERESSE SOCIAL QUANTO A FORMAÇÃO DE FUNGOS FILAMENTOSOS. SIMPÓSIO BRASILEIRO DE QUALIDADE DE PROJETO DO AMBIENTE CONSTRUÍDO, 8(1). https://doi.org/10.46421/sbqp.v8i.4625

Issue

Section

DESEMPENHO - PROCESSOS AVALIATIVOS: DO PROJETO À PÓS-OCUPAÇÃO

Similar Articles

<< < 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.