PERDAS POR MAKING-DO: UM ESTUDO DE CASO EM CANTEIROS DE OBRAS DE FORTALEZA/CE

Authors

  • Amanda Amanda Universidade Federal do Ceará
  • éden Santos Universidade Federal do Ceará
  • Amanda Machado Universidade Federal do Ceará
  • Tatiana Amaral Universidade Federal do Ceará
  • José Barros Neto Universidade Federal do Ceará

DOI:

https://doi.org/10.46421/entac.v18i.1058

Keywords:

Making-do, improvisation, waste, construction sites

Abstract

The competitive market in the civil construction sector causes companies to develop actions in their construction processes to avoid waste. The making-do waste or improvisation comes from a situation where activities are initiated without the necessary resources, such as materials, labor or equipment, or when these items are not suitable for carrying out an activity. The study of this type of waste allows to optimize the planning and control of tasks and, therefore, reduce other types of waste. Thus, this work aims to diagnose waste by making-do, analyzing causes and categories of the waste and its impacts on the production performance of three construction companies in Fortaleza / CE, classifying each waste identified in categories and prerequisites defined by the literature and analyzing the main impacts generated. Therefore, at the end of the study, it was identified that most of the observed events were related to the adjustment of components, being caused mainly by flaws in materials and components and generating, as the most significant impact, the rework in the production processes.

References

AMARAL, T. G.; BRANDÃO, C. M.; ELIAS, K. V.; BRAGA, P. B. Identificação de perdas por improvisação em canteiros de obras. Rev. Eletr. Eng. Civ. (REEC), 15 (1), 245-260, 2019.

FIREMAN, M. C. T. Proposta de método de controle integrado entre produção e qualidade com mensuração de perdas por making-do e pacotes informais. Porto Alegre, 2012. 179 f.

Dissertação (Mestrado em Engenharia) – Programa de Pós-Graduação em Engenharia Civil, Universidade Federal do Rio Grande do Sul, Porto Alegre, 2012.

FIREMAN, M. C. T., FORMOSO, C. T., ISATTO, E. L. Integrating Production and Quality Control: monitoring making-do and unfinished work. In: 21th ANNUAL CONFERENCE OF THE INTERNATIONAL GROUP FOR LEAN CONSTRUCTION, 2013. Anais… Fortaleza: IGLC, 2013.

FORMOSO, C. T.; CESARE, C. M.; LANTELME, E. M. V.; SOIBELMAN, L. Perdas na construção civil: conceitos, classificações e seu papel na melhoria do setor, Porto Alegre, p.01-11, 1997.

Disponível em: <http://www.pedrasul.com.br/artigos/perdas.pdf >. Acesso em 10 set. 2019FORMOSO, C.T., SOMMER, L., KOSKELA, L., ISATTO, E. L. An Exploratory Study on the Measurement and Analysis of Making-do in Construction Sites. In: 19th ANNUAL CONFERENCE OF THE INTERNATIONAL GROUP FOR LEAN CONSTRUCTION, 2011. Anais… Lima: IGLC, 2011.

FORMOSO, C. T.; SOMMER, L.; KOSKELA, L.; ISATTO, E. L. The identification and analysis of making-do waste: insights from two Brazilian construction sites. Ambiente Construído, Porto Alegre, v. 17, n. 3, p. 183-197, jul./set. 2017.

KOSKELA, L. Making-do: the eighth category of waste. In: 12.th INTERNATIONAL GROUP FOR LEAN CONSTRUCTION ANNUAL CONFERENCE, 2004. Anais... Elsinore: IGLC, 2004.

LEÃO, C. F. Proposta de Modelo Para Controle Integrado da Produção e da QualidadeUtilizando Tecnologia de Informação. Porto Alegre, 2014. 179 f. Dissertação (Mestrado em Engenharia) – Programa de Pós-Graduação em Engenharia Civil, Universidade Federal do RioGrande do Sul, Porto Alegre, 2014.

LOVE, P.E.D. Auditing the indirect consequences of rework in construction: a case based approach. Managerial Auditing Journal. v. 17, n. 3, P. 138-146, 2002.

MACHADO, R. L. A sistematização de antecipações gerenciais no planejamento da produção de sistemas da construção civil. Tese (Doutorado em Engenharia de Produção) –Programa de Pós-Graduação em Engenharia de Produção, Universidade Federal de Santa Catarina, Florianópolis, 2003.

OHNO, T. O Sistema Toyota de Produção: além da produção em larga escala. Porto Alegre: Bookman Companhia Editora, 1997.

RONEN, B. The complete kit concept. International Journal of Production Research, 30 (10), 57- 66, 1992.

SANTOS, P. R. R.; SANTOS, D. de G. Investigação de perdas devido ao trabalho inacabado e o seu impacto no tempo de ciclo dos processos construtivos. Ambiente Construído, Porto Alegre, v. 17, n. 2, p. 39-52, abr./jun. 2017.

SOMMER, L. Contribuições para um método de identificação de perdas por improvisação em canteiros de obras. Porto Alegre, 2010. 150 f. Dissertação (Mestrado em Engenharia Civil) –Programa de Pós-Graduação em Engenharia Civil, Universidade Federal do Rio Grande do Sul, Porto Alegre, 2010.

Published

2020-11-04

How to Cite

AMANDA, Amanda; SANTOS, éden; MACHADO, Amanda; AMARAL, Tatiana; BARROS NETO, José. PERDAS POR MAKING-DO: UM ESTUDO DE CASO EM CANTEIROS DE OBRAS DE FORTALEZA/CE. In: NATIONAL MEETING OF BUILT ENVIRONMENT TECHNOLOGY, 18., 2020. Anais [...]. Porto Alegre: ANTAC, 2020. p. 1–8. DOI: 10.46421/entac.v18i.1058. Disponível em: https://eventos.antac.org.br/index.php/entac/article/view/1058. Acesso em: 18 jul. 2024.

Issue

Section

(Inativa) Gestão e Economia da Construção

Most read articles by the same author(s)

1 2 > >> 

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.