INTEGRAÇÃO DO MONITORAMENTO COM VANT À GESTÃO DA SEGURANÇA DAS OBRAS: UMA REVISÃO SISTEMÁTICA DA LITERATURA
DOI:
https://doi.org/10.46421/entac.v18i.1162Keywords:
Unmanned Aerial System (UAS), Safety, Construction projectsAbstract
Although several studies have explored the potential of UASs to support safety activities at construction sites, this application has still been limited. The lack of integration of UASs monitoring to the safety management processes is one of the limitations. Therefore, this paper seeks to identify how the UASs can be integrated into the safety management processes on construction sites. The systematic literature review is the research strategy adopted. The UAS has been applied mainly to monitor the safety conditions of the construction site, but the information collected at this stage can support the entire cycle of continuous safety improvement.
References
ALIZADEHSALEHI, S.; YITMEN, I.; CELIK, T.; ARDITI, D. The effectiveness of an integrated BIM/UAV model in managing safety on construction sites. International Journal of Occupational Safety and Ergonomics, p. 1-16, 2018.
ASHOUR, R.; TAHA, T.; MOHAMED, F.; HABLEEL, E.; KHEIL, Y.; ELSALAMOUNY, M.; KADADHA, M.; RANGAN, K.; DIAS, J.; SENEVIRATNE, L.; CAI, G. Site inspection drone: A solution for inspecting and regulating construction sites. In: International Midwest Symposium on Circuits and Systems, 59, 2016, Abu Dhabi. Proceedings... Abu Dhabi : MWSCAS, 2016.
BENITE, A. J. Sistema de Gestão da Segurança e Saúde do Trabalho para Empresas Construtoras. 236 f. Dissertação (Mestrado em Engenharia) – Programa de Pós-Graduação em Engenharia, Escola Politécnica da Universidade de São Paulo, São Paulo, 2004.
CALANTROPIO, A. The use of UAVs for performing safety-related tasks at post-disaster and non-critical construction sites. Safety, vol. 5, 64, 2019.
CAMPOS, V. F. TQC - Controle da Qualidade Total (no estilo japonês). Belo Horizonte: Fundação Christiano Ottoni. Escola de Engenharia, 1992.
COSTA D.B.; MELO, R. R. S.; ALVARES J. S.; BELLO A. A. Evaluating the Performance of Unmanned Aerial Vehicles for Safety Monitoring. In: Annual Conference of the International Group for Lean Construction, 24, p. 23-32, 2016, Boston. Proceedings... Boston: IGLC, 2016.
GHEISARI, M.; ESMAEILI, B. Applications and requirements of unmanned aerial systems (UASs) for construction safety. Safety Science, v. 118, p. 230-240, 2019.
GHEISARI, M.; ESMAEILI, B. Unmanned Aerial Systems (UAS) for construction safety applications. In: Construction Research Congress, San Juan, p. 2642-2650, 2016. Proceedings...
GHEISARI, M.; IRIZARRY, J.; WALKER, B. UAS4SAFETY: The potential of unmanned aerial systems for construction safety applications. In: Construction Research Congress, p.1801-1810, 2014. Proceedings...
GHEISARI, M.; RASHIDI, A.; ESMAEILI, B. Using Unmanned Aerial Systems for Automated Fall Hazard Monitoring. In: Construction Research Congress, p. 62-72, 2018, New Orleans. Proceedings...
GUO, Y.; NIU, H.; LI, S. Safety monitoring in construction site based on unmanned aerial vehicle platform with computer vision using transfer learning techniques. In: Asia-Pacific Workshop on Structural Health Monitoring, 7, 2018, Hong Kong. Proceedings... Hong Kong: APWSHM, 2018.
GUO, Y.; XU, Y.; LI, S. Dense construction vehicle detection based on orientation-aware feature fusion convolutional neural network. Automation in Construction, vol. 112, 103124, 2020.
IRIZARRY, J.; COSTA, D. B. Exploratory study of potential applications of unmanned aerial systems for construction management tasks. Journal of Management in Engineering, v. 32, n. 3, p. 05016001, 2016.
IRIZARRY, J.; GHEISARI, M.; WALKER, B. N. Usability assessment of drone technology as safety inspection tools. Electronic Journal of Information Technology in Construction. p. 194–212. 2012.
ISO. ISO 45001 - Occupational health and safety management systems - Requirements for guidance use. 1. ed. Geneva: ISO, 2018.
JIANG, W.; ZHOU, Y.; DING, L.; ZHOU, C.; NING, X. UAV-based 3D reconstruction for hoist site mapping and layout planning in petrochemical construction. Automation in Construction, vol. 113, 103137, 2020.
KAMING, P.; YONATHAN, G. Comparison of the supervisory cost of using an unmanned aerial system and conventional methods in construction projects. In: International Conference on Euro Asia Civil Engineering Forum, 7, 2019. Proceedings...
KIM, S.; IRIZARRY, J., COSTA, D. Potential Factors Influencing the Performance of Unmanned Aerial System (UAS) Integrated Safety Control for Construction Worksites. In: Construction Research Congress, p.2614-2623, 2016. Proceedings...
KIM, S.; IRIZARRY, J; COSTA, D. Field Test-Based UAS Operational Procedures and Considerations for Construction Safety Management: a qualitative exploratory study. : A Qualitative Exploratory Study. International Journal Of Civil Engineering, 123, 2020.
MACHADO, F.; RUSCHEL, R. Soluções integrando BIM e internet das coisas no ciclo de vida da edificação: uma revisão crítica. Parc Pesquisa em Arquitetura e Construção, v. 9, n. 3, p. 240-258, 2018.
MARTINEZ, J.; GHEISARI, M.; ALARCÓN, L. UAV Integration in Current Construction Safety Planning and Monitoring Processes: Case Study of a High-Rise Building Construction Project in Chile. Journal of Management in Engineering, vol. 36 (3), 05020005, 2020.
MELO, R.; COSTA, D. ;ÁLVARES,J.; IRIZARRY, J. Applicability of unmanned aerial system (UAS) for safety inspection on construction sites. Safety Science,v. 98, p. 174-185, 2017.
MELO, R.; COSTA, D. Integrating resilience engineering and UAS technology into construction safety planning and control. Engineering Construction & Architectural Management, vol. 26, 2019.
PARK, J.; KIM, K.; CHO, Y. K. Framework of automated construction-safety monitoring using cloud-enabled BIM and BLE mobile tracking sensors. Journal of Construction Engineering and Management, v. 143, n. 2, 05016019, 2016.
ROBERTS, D.; BRET, T.; GOLPARVAR-FARD, M. Detecting and Classifying Cranes Using CameraEquipped UAVs for Monitoring Crane-Related Safety Hazards. In: International Workshop on Computing in Civil Engineering, p.442-449, 2017, Seattle. Proceedings... Seattle: IWCCE, 2017.
