The challenge of risk management in construction sites and its relationship with wastes
DOI:
https://doi.org/10.46421/entac.v19i1.2159Keywords:
Making-do, Rework, RiskAbstract
This research had a qualitative and exploratory character and was based on two projects selected for the case studies, which were coordinated by the architectural firm. The wastes by making-do are present in all stages, existing countless combinations between the prerequisites, categories and impacts in works. The objective of this work was to study the relationship between the causes, categories and impacts of making-do related wastes and to analyze the risks of the impacts generated by them. The item information was the one that resulted in a higher number of wastes, related to the categories component adjustment and sequencing. The wastes that generate the greatest risk on site are the category of component adjustment and rework related to the lack of the prerequisite information.
References
FORMOSO, C.T.; SOIBELMAN, L.M.; CESARE, C.D.; ISATTO, E.L. Material Waste in Building Industry: main causes and prevention. Journal of construction engineering and management, v. 128, n. 4, p. 316-325. 2002.
FORMOSO, C. T.; SOMMER, L.; KOSKELA, L.; ISATTO, E. L. The identification and analysis of making-do waste: insights from two Brazilian construction sites. Ambiente Construído, v. 17, n. 3, p. 183-197, jul. /set. 2017.
HWANG, Bon-Gang; THOMAS, S. R.; HAAS, T. C.; and CALDAS, Carlos H. Measuring the Impact of Rework on Construction Cost Performance. Journal of Construction Engineering and Management, v. 135, n. 3, p. 187-198. 2009.
KOUSHKI, P. A.; AL‐RASHID, K.; KARTAM, N. Delays and cost increases in the construction of private residential projects in Kuwait. Construction Management and Economics. Informa UK Limited, mar. 2005. Disponível em: <http://dx.doi.org/10.1080/0144619042000326710>
LEÃO, C. F. Proposta de Modelo Para Controle Integrado da Produção e da Qualidade Utilizando Tecnologia de Informação. Porto Alegre, 2014. 179 f. Dissertação (Mestrado em Engenharia) – Programa de Pós-Graduação em Engenharia Civil, Universidade Federal do Rio Grande do Sul, Porto Alegre, 2014.
LEÃO, C. F.; Isatto, E. L.; Formoso, C. T. Proposta de modelo para controle integrado da produção e da qualidade com apoio da computação móvel. Ambiente Construído, Porto Alegre, v. 16, n. 4, p. 109-124. 2016.
FORMOSO, C. T. et. al. Perdas na construção civil: conceitos, classificações e seu papel na melhoria do setor. Porto Alegre, p.01-11, 1997. Disponível em: <http://www.pedrasul.com.br/artigos/perdas.pdf >. Acesso em 06 abril, 2019.
VIANA, D. D.; FORMOSO, C. T.; KALSAAS, B. T. Waste in Construction: A Systematic Literature Review on Empirical Studies. Proceedings for the 20th Annual Conference of the International Group for Lean Construction. San Diego, USA. 2012.
KOSKELA, L. Making-do – The Eighth Category of Waste. In: Annual Conference of the International Group for Lean Construction, 12, 2004, Dinamarca. Proceedings… Dinamarca, 2004.
RONEN, B. The Complete Kit Concept. International Journal of Production, v. 30, n. 10, p. 2457–2466, 1992.
SOMMER, L. Contribuições Para Um Método de Identificação de Perdas Por improvisação em Canteiros de Obras. Porto Alegre, 2010. 150 f. Dissertação (Mestrado em Engenharia Civil) – Programa de Pós-Graduação em Engenharia Civil, Universidade Federal do Rio Grande do Sul, Porto Alegre, 2010.
FIREMAN, M.T., FORMOSO, C.T., ISATTO, E. L. Integrating Production and Quality Control: Monitoring Making-do and Unfinished Work. 21th Annual Conference of the International Group for Lean Construction. Fortaleza, Brazil, 2013.
SANTOS, P. R. R.; SANTOS, D. de G. Investigação de perdas devido ao trabalho inacabado e o seu impacto no tempo de ciclo dos processos construtivos. Ambiente Construído, Porto Alegre, v. 17, n. 2, p. 39-52, abr./jun. 2017.
AMARAL, T. G.; BRANDÃO, C. M.; ELIAS, K. V., BRAGA, P. B. Identificação de perdas por improvisação em canteiros de obra. Revista Eletrônica de Engenharia Civil, volume 15, REEC, 2019.
AMARAL, T. G.; BRANDÃO, C. M.; ELIAS, K. V., BRAGA, P. B. Dynamic method to identify and analyze waste by making-do in construction sites. Gestão & Produção. 2021.
SANTOS, E. M.; FONTENELE, A. D.; MACHADO, M. L.; BARROS NETO, J. P.; AMARAL, T. G. Analysis of Making-do Waste at Site in Fortaleza, Ceará, Brazil. In: Annual Conference of the International Group for Lean Construction, 28th, Berkeley, IGLC, Berkeley, 2020.
JOSEPHSON, P.E.; HAMMARLUND, Y. The causes and costs of defects in construction – A study of seven building projects. Automation in Construction 8 (1999), pp. 681-687. 1999.
HORMAN, M. J.; KENLEY, R. Quantifying Levels of Wasted Time in Construction with Meta-Analysis. Journal of Construction Engineering and Management. American Society of Civil Engineers (ASCE), jan. 2005. Disponível em: <http://dx.doi.org/10.1061/(ASCE)0733-9364(2005)131:1(52)>
OHNO, T. O Sistema Toyota de Produção: além da produção em larga escala. Porto Alegre: Bookman, 1997.
SAURIN, T.A.; SANCHES, R.C. Lean Construction and Resilience Engineering: Complementary Perspectives of Variability. In: Annual Conference of the International Group for Lean Construction, 22, IGLC, Oslo, 2014.
FORMOSO, C.T.; SOMMER, L.; KOSKELA, L.; ISATTO, E. L. An Exploratory Study on the Measurement and Analysis of Making-do in Construction Sites. In: Annual Conference of the International Group for Lean Construction, 19th, Lima, 2011. Proceedings… Lima, 2011.
LEÃO, C.F.; FORMOSO, C.T.; ISATTO, E.L. Integrating Production and Quality Control with the Support of Information Technology. In: ANNUAL CONFERENCE OF THE INTERNATIONAL GROUP FOR LEAN CONSTRUCTION, 22, IGLC, Oslo, 2014.
FORMOSO, C.T.; BØLVIKEN, T., ROOKE, J.; KOSKELA, L. A Conceptual Framework for the Prescriptive Causal Analysis of Construction Waste. In: Proceedings of the 23rd Annual Conference of the International Group for Lean Construction. IGLC (23). IGLC.net, Perth, Australia, pp. 454-461. 2015.
FIREMAN, M. C. T.; FORMOSO, C. T. Integrating production and quality control: monitoring making-do and unfinished work. In: Annual Conference of the International Group for Lean Construction, 21th, Fortaleza, 2013. Proceedings… Fortaleza, 2013.
KALSAAS, B.T. Further Work of Measuring Workflow in Construction Site Production. In: Annual Conference of the International Group for Lean Construction, 20., San Diego, 2012.
