Rapid additive manufacturing considerations and the use of new types of concrete in printed constructions
DOI:
https://doi.org/10.46421/entac.v19i1.2204Keywords:
PortuguêsAbstract
Rapid additive manufacturing emerged as an evolution of the development of rapid prototyping technologies that, since the 1980s, have completely changed the scenario of prototyping. This work aims to carry out descriptive research on the impact of adopting these new digital technologies against the requirements and possible advantages related to new materials and a lower environmental impact for buildings. Additive manufacturing in concrete is a new concept in building environments and is becoming an effective reality every day, making practical processes marked by freedom of design with the use of complex physical shapes, manufacturing precision with functional voids, dynamic efficiency of construction from design, which is not possible with conventional construction processes.
References
ALAM, Jawaherul; BLASIUS, Thomas; RUTTER, Ignaz; UECKERDT, Torsten and WOLFF, Alexander. Graph Drawing and Network Visualization - chap. Contact Representations (pgs. 472-486), 27th International Symposium, Praga, 2019
APRIANTI, Evi; SHAFIGH, Payam; BAHRI, Syamsul; FARAHANI, Javad Nodeh. Supplementary cementitious materials origin from agricultural wastes – A review. Construction and Building Materials, 74, pages 176–187, 2014.
ASPRONE, Domenico, MENNA, Costantino, BOD, Freek P., SALET, Theo A. M., MATA-FALCÓN, Jaime, KAUFMANN, Walter. Rethinking reinforcement for digital fabrication with concrete. Cement and Concrete Research, 2018.
BACHMANN, Talis. Perception of Pixelated Images. Academic Press is an imprint of Elsevier, London, 2016.
BANKS, Jerry. Introduction to simulation. In Winter Simulation Conference, Proceedings..., Atlanta, USA, 1999.
BRYDEN, Douglas. CAD and Rapid Prototyping Product Design. Laurence King Publishing Ltd, London, 2014.
CHENG, Y., HUANG, F, LIU, R., LOU, L., LI, G. Test research on effects of waste ceramic polishing powder on the permeability resistance of concrete, Materials and Structures, vol 9, 2016.
CHUNG, Jihoon, LEE, Ghang, KIM, Jung-Hoon. Framework for technical specifications of 3D concrete printers. Automation in Construction, 2021.
DEMYANOV, Alexey; POPOV, Ilya. Overview of global design experience and a design of a mobile construction 3D printer. Architecture and Engineering, Volume 4 Issue 4. Pages 22-29. DOI: 10.23968/2500-0055-2019-4-4-22-29.
DINI, P., RATHBONE, N., VIDAL, M., HERNANDEZ, P., FERRONATO, P., BRISCONE, G., HENDRIX, S. The digital ecosystems research vision: 2010 and beyond. European Commission, 2005. Disponível em <https://web.archive.org /web/20130903230323/http://digital-ecosystems.org/events/2005.05/de_position_paper_vf.pdf>. Acessado em 01 de maio de 2018.
DUBALLET, R., BAVEREL, O. DIRREMBERG, J. Classification of building systems for concrete 3D printing. Automation in Construction. Volume 83, November 2017, Pages 247-258.
FLORÊNCIO, Eduardo Q, - A impressão 3D em concreto e seu impacto na produção da arquitetura: o futuro da construção civil? Dissertação, Universidade Federal de Alagoas - UFAL - Programa Pós-graduação Arquitetura e Urbanismo, Brasil, 2017
FLORÊNCIO, Eduardo; MARQUES, Lêda; CORSO, Nádia; LIMA, Thiago; UCHÔA, Sílvia - Concreto para uso em Impressora 3D e sua utilização na construção de edificações: um estudo prospectivo. Caderno Prospectivo, v.10, n.3 - Alagoas, 2017. http://dx.doi.org/10.9771/cp.v10i3.23203.
GIBSON, I., ROSEN, D. W., STUCKER, B. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. Springer, New York. ISBN: 978-1-4419-1119-3, 2010.
GUNASEKAR, S.; RAMESH, N.; SHIVANI, G. Effective Utilisation of Construction and Demolition Waste (CDW) As Recycled Aggregate in Concrete Construction – A Critical Review. International Research Journal of Multidisciplinary Technovation (IRJMT), v.1, p. 465-46, 2019.
HAMBACH, Manuel, VOLKMER, Dirk - Properties of 3D-printed fiber-reinforced Portland cement paste. Cement and Concrete Composites. Elsevier Science Direct. 2017
KARMANI, Ali K. e NASR, Emad Abouel. Engineering Design and Rapid Prototyping, Springer New York Dordrecht Heidelberg London, 2010 - ISBN 978-0-387-95862-0, e-ISBN 978-0-387-95863-7 e DOI 10.1007/978-0-387-95863-7.
KHAN, M. A. Mix suitable for concrete 3D printing: A review. Materials Today: Proceedings, 2020.
KRISHNARAJA, A. R., GURU, K. V. 3D Printing Concrete: A Review. IOP Conf. Series: Materials Science and Engineering. IOP Publications, doi: 10.1088/1757-899X/1055/1/012033. 2020.
LETELIER, Viviana, HENRIQUEZ-JARA, Bastián, MANOSALVA, Miguel, MORICONI, Giacomo - Combined use of waste concrete and glass as a replacement for mortar raw materials, Waste Management, 2020.
LÉVY, Pierre. O Que é Virtual? Rio de Janeiro: Editora 34, 1996.
LIM, S.; Buswell, R. A.; Le, T. T.; Austin, S. A.; Gibb, A. G. F.; Thorpe, T. Developments in construction-scale additive manufacturing processes. Automation in Construction. n.21, p. 262-268, 2012.
LIOU, Fuewen Frank. Rapid Prototyping and Engineering Applications: A Toolbox for Prototype Development. CRC Taylor & Francis Group, New York, 2019.
MOHAMMAD, Malek, AL-GHAMDI, Sami, SEERS, Thomas. High-Performance Light-Weight Concrete for 3D Printing. F. P. Bos et al. (Eds.): DC 2020, RILEM Bookseries 28. 2020. Disponível em https://doi.org/10.1007/978-3-030-49916-7_47. Acesso em 12 julho 2021.
NARAYAN, Roger. Rapid Prototyping of Biomaterials Techniques in Additive Manufacturing, Second Edition - Woodhead Publishing, Elsevier - United Kingdom, 2019.
PAPADAKIS, V. G., TSIMAS, S. – Supplementary cementing materials in concrete. Part I: efficiency and design. Cement and Concrete Research, n. 32. Elsevier Science Ltd. 2002
SCRIVENER, Karen L., UN ENVIRONMENT, John, VANDELEY M. e GARTNERC, Ellis M. Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry, Cement and Concrete Research, v.114, 2018.
SILVA, Guilherme, RIBEIRO, Carmen, RIBEIRO, Sidnea, OLIVEIRA, Danielle, OLIVEIRA, Wesley - Resíduos de construção e demolição em tecnologia de concreto: uma revisão. Brazilian Journal of Development, 2020. DOI: 10.34117/bjdv6n7-357.
UM, Dugan. Solid Modeling and Applications - Rapid Prototyping, CAD and CAE Theory, Springer International Publishing. AG, 2018. https://doi.org/10.1007/978-3-319-74594-7.
VANTYGHEM, Gieljan; OOMS, Ticho e DE CORTE, Wouter. VoxelPrint - A Grasshopper plug-in for voxel-based numerical simulation of concrete printing. Automation in Construction Journal, Elsevier, 2021.
WANG, J.; WU, H.; TAM, V.W.Y.; ZUO, J. Considering life-cycle environmental impacts and society's willingness for optimizing construction and demolition waste management fee: An empirical study of China. Journal of Cleaner Production, v. 206, p.1004-1014, 2019.
ZHANG, Jingchuan, WANG, Jialiang, DONG, Sufen, YU, Xun, HAN, Baoguo. A review of the current progress and application of 3D printed concrete. Composites Part A: Applied Science and Manufacturing, Volume 125, October 2019.
ZHANG, Jingchuan, WANG, Jialiang, DONG, Sufen, YU, Xun, HAN, Baoguo. A review of the current progress and application of 3D printed concrete. Composites Part A: Applied Science and Manufacturing, Volume 125, October 2019.
