Flexural tensile strength for structural masonry of concrete blocks, executed with thin joints of polymeric compound: test methods

Authors

DOI:

https://doi.org/10.46421/entac.v19i1.2226

Keywords:

Concrete block; Masonry; Polymeric compound; Laying joint; Thin joint.

Abstract

This paper evaluates the flexural tensile strength for structural masonry of concrete blocks, executed with thin joints of polymeric compound. To this end tests were performed using NBR 16868-3 (2020) and AS 3700 (2017), for prisms with concrete blocks of 4, 8 and 16 MPa, considering cementitious and polymeric compound. The results show that the flexural tensile strength values are higher for polymeric mortars compound. When the two tests were compared, it was found that the data obtained through the Australian standard are greater than those obtained with the Brazilian standard test.

Author Biographies

Gustavo Sipp, Universidade Federal de São Carlos

Mestrado em Estruturas e Construção pela Universidade Federal de São Carlos. Doutorando em Estruturas e Construção Civil  naUniversidade Federal de São Carlos (São Carlos - SP, Brasil).

Murilo de Carvalho Maturana, Universidade Federal de São Carlos

Cursando Engenharia Civil na Universidade Federal de São Carlos (São Carlos - SP, Brasil).

Lucia Bressiani , Universidade Tecnológica Federal do Paraná

Doutorado em Engenharia Civil pela Universidade Federal de Santa Catarina. Professora Adjunta na Universidade Tecnológica Federal do Paraná (Toledo - PR, Brasil)

 

Guilherme Aris Parsekian, Universidade Federal de São Carlos

Doutorado em Engenharia Civil  pela Universidade de São Paulo. Professor Associado da Universidade Federal de São Carlos (São Carlos - SP, Brasil).

References

ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. 16868-3: Alvenaria estrutural - Métodos de ensaio. 1 ed. Rio de Janeiro: ABNT, 2020

KANYETO, O.j.; FRIED, A. Flexural behaviour of thin joint concrete blockwork: Experimental results. Construction And Building Materials, [s.l.], v. 25, n. 8, p.3639-3647, ago. 2011. Elsevier BV. http://dx.doi.org/10.1016/j.conbuildmat.2011.03.059.

MARROCCHINO, E.; FRIED, A.n.; KOULOURIS, A.; VACCARO, C.. Micro-chemical/structural characterisation of thin layer masonry: A correlation with engineering performance. Construction And Building Materials, [s.l.], v. 23, n. 1, p.582-594, jan. 2009. Elsevier BV. http://dx.doi.org/10.1016/j.conbuildmat.2007.09.010.

MORTON, John. Designers’ Guide to Eurocode 6: design of masonry structures. London: Ice Publishing, 2012. 152 p.

PASQUANTONIO, Rafael D.; PARSEKIAN, Guilherme Aris; FONSECA, Fernando S.; SHRIVE, Nigel G.. Experimental and numerical characterization of the interface between concrete masonry block and mortar. Revista Ibracon de Estruturas e Materiais, São Paulo, v. 13, n. 3, p. 578-592, jun. 2020. Artigo aceito para publicação.

RAYMUNDO, Carolina A. C.; PARSEKIAN, Guilherme A.; RAYMUNDO, Henrique. Utilização de argamassa polimérica com junta fina em alvenarias. 1° Workshop de Tecnologia de Processos e Sistemas Construtivos - Tecsic. Campinas, p. 1-9. ago. 2017.

THAMBOO, Julian Ajith; DHANASEKAR, M.; YAN, C. Thin bed mansory system: review ans future prospects. In: THE INTERNACIONAL CONFERENCE ON STRUCTURAL ENGINEERING, 2011, Sri Lanka, Anais… Kandy: Construction and Managemente, 2011.

Published

2022-11-07

How to Cite

SIPP, Gustavo; MATURANA, Murilo de Carvalho; BRESSIANI , Lucia; PARSEKIAN, Guilherme Aris. Flexural tensile strength for structural masonry of concrete blocks, executed with thin joints of polymeric compound: test methods. In: NATIONAL MEETING OF BUILT ENVIRONMENT TECHNOLOGY, 19., 2022. Anais [...]. Porto Alegre: ANTAC, 2022. DOI: 10.46421/entac.v19i1.2226. Disponível em: https://eventos.antac.org.br/index.php/entac/article/view/2226. Acesso em: 3 jul. 2024.

Issue

Section

(Inativa) Tecnologias de Sistemas e Processos Construtivos

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.