ARCHITECTURAL AND STRUCTURAL DESIGN WITH STRUCTURAL COMPOSITE LUMBER (SCL)

Authors

  • Albenise Laverde Universidade Federal de Uberlândia – UFU
  • Maria Clara R. Barbosa Universidade Federal de Uberlândia – UFU

DOI:

https://doi.org/10.29327/sbqp2021.438071

Keywords:

Timber constructions, Timber architecture, Structural Composite Lumber, Structure in woodbased

Abstract

The development of new constructive possibilities with traditional materials has been growing over the last few years, especially when directed to the use of raw materials with low environmental impact, such the wood. This work aims to analyze the main technological advances involving SCL- Structural Composite Lumber, with the identification of different techniques currently available and their potential application as structural element. From the bibliographical and documentary research in different scientific sources, it was observed that many advances are in the international context and are directed to the development of new adhesives, additives and machining processes, in which processing particularities characterize the wide variety of products found with SCL, expanding the application possibilities for increasingly complex purposes.

References

APA Engineered Wood Construction Guide Excerpt: Structural Composite Lumber(SCL) Selection and Specification, dez 2019.

ARREDONDO, C. P.; Holzapfel, H. R. Sistemas estructurales en madera. In: Edificacionen madera, Concepción, ano 7(1991), n. 7, ed. 41, p. 1-32, 1991.

BENOIT, Y. La maison à ossature bois par les schémas: Manuel de construction visuel.Paris: Eyrolles, 2014. 356 p.

CWC ADMIN. Oriented Strand Board (OSB)/ Parallel Strand Lumber (PSL)/ OrientedStrand Lumber (OSL). In: CANADIAN WOOD COUNCIL. How to build with wood.

Canadá. Disponível em: https://cwc.ca/how-to-build-with-wood/woodproducts/panel-products.

Design and fabrication Plywood Stressed Skin Panel. APA – The Engineered WoodAssociation, suplement 3. 1990.

HERZOG, T. et al. Timber construction manual. 1. ed. Boston: Birkhäuser, 2004. 375 p.

IWAKIRI, S. Painéis de madeira reconstituída. Curitiba: FUPEF, 2005KOLLMANN, F. F. P.; KUENZI, E. W.; STAMM, A. J. Principles of wood science andtechnology: wood based materials. Berlin: Springer-Verlag, v. 2. 1975.

KURT, Ramazan et al. Manufacturing of parallel strand lumber (PSL) from rotarypeeled hybrid poplar 1-214 veneers with phenol formaldehyde and ureaformaldehyde adhesives. Wood Research, Kahramanmaras, Turkey, v. 56 (1): 2011, p.137-144.

MATOS, Jorge Luis M. Estudos sobre a produção de painéis estruturais de lâminasparalelas de Pinus taeda. Tese (Pós-graduação em Engenharia Florestal) -Universidade Federal do Paraná, Curitiba, 1997.

NOGUEIRA, R. S. Proposta de um método de ensaio para controle de qualidade naprodução de elementos estruturais de MLC e LVL. Mestrado (Pós-graduação em CiênciaEngenharia de Estruturas) Escola de Engenharia de São Carlos, Universidade de SãoPaulo, 2017.

OZELTON, E. C.; BAIRD, J. A. Structural Composite Lumber. In: Timber Designers 'Manual,Blackwell Science, 2008.

STARK, Nicole M. et al. Wood-Based Composite Materials: Panel Products, GluedLaminated Timber, Structural Composite Lumber, and Wood–Nonwood CompositeMaterials. Separata de: FOREST PRODUCTS LABORATORY. Wood Handbook: Wood asan Engineering Material. 1. ed. Madison: Department of Agriculture, Forest Service,Forest Products Laboratory, 2010. cap. 11, p. 11-1 - 11-28.

WRIGHT, D. Build With SIPs. In: Mother Earth News. [S. l.], 10 nov. 2011. Disponível em:https://www.motherearthnews.com/diy/buildings/structural-insulated-panelszm0z11zphe. Acesso em: 14 maio 2020.

YOUNGQUIST, John A. Wood-based Composites and Panel Products. Separata de:FOREST PRODUCTS LABORATORY. Wood Handbook: Wood as an Engineering Material.

Madison: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1999.cap. 10, p. 10-1 - 10-31.

ZENID, Geraldo José (coord.). Madeira: uso sustentável na construção civil. 2. ed.

São Paulo: Instituto de Pesquisas Tecnológicas, 2009.

Published

2021-11-19

How to Cite

Laverde, A. ., & Clara R. Barbosa, M. . (2021). ARCHITECTURAL AND STRUCTURAL DESIGN WITH STRUCTURAL COMPOSITE LUMBER (SCL). SIMPÓSIO BRASILEIRO DE QUALIDADE DE PROJETO DO AMBIENTE CONSTRUÍDO, 7, 1–10. https://doi.org/10.29327/sbqp2021.438071

Issue

Section

Sustentabilidade, eficiência e qualidade no projeto

Similar Articles

<< < 8 9 10 11 12 13 14 15 > >> 

You may also start an advanced similarity search for this article.